Adds measurement capability to 1pA resolution, and measures high value resistors to 1TOhm using the calibrator as a precision DC voltage source

  • Accurate current measurement down to 1pA resolution
  • Ideal for high value resistance measurements up to 1 TOhm
  • High resistance measurement voltages up to 1000V
  • 5 current measurement rnages from 10nA to 100uA
  • Control directly from the calibrator front panel or use with ProCal software

As multimeters add more accurate low current ranges, traditional multi-product calibrators lack the precision and noise level for accurate calibration. With the EA013 pA source adapter, calibration of these instruments becomes simple

  • Ideal for calibration of electrometer instruments
  • Source accurate current down to picoamp levels
  • Low open circuit compliance voltage
  • Safe to use on sensitive input circuits
  • Controlled directly from the calibrator front panel or via supplied software
  • Compatible with ProCal for full measurement automation

Extend your laboratory's capabilities with the ability to calibrate torque screwdrivers and much more

Combining Transmille's most popular options, the EA015 provides a cost-effective method of increasing the workload coverage of Transmille calibrators

  • Insulation Testers
  • Continuity Testers
  • Optical Tachometers
  • Thermocouple Meters
  • Clamp Meters
  • Source functions of process control meters

Measure environmental factors both on site and in the laboratory

  • Humidity measurement from 10% to 90%
  • Temperature measurement from 0°C to 50°C

Automate calibration of 4 channel oscilloscopes with automised switching of channels with the EA017 adapter

  • 4 Output channels for automating oscilloscope calibration
  • Minimises lead changing when calibrating oscilloscopes
  • Choose between direct or buffered outputs for amplitude calibration

Enables calibration of source functions of Process Control instruments including voltage, current and resistance.

  • Extends workload of 1000 Series Calibrators
  • Measure source functions from process control instruments
  • Voltages up to 30V
  • Currents up to 30A
  • 2 and 4 wire resistance up to 10 kOhms
  • 24V loop supply

Calibrate low value high current shunts up to 100A and clamp meters up to 2000A using the EA3012A Transconductance Amplifier

  • 100 DC/70A AC up to 400Hz
  • Stackable for higher currents
  • Low-noise ultra linear MOSFET technology
  • Controlled directly via front panel of calibrator
  • Automation through ProCal software
  • Ideal for calibrating high current shunts, meters and clamp meters

Increase your laboratory capability with the ability to calibrate power supplies up to 3A/63V

  • Measures voltage up to 63V
  • Active current load to 3A
  • Calculates output resistance of a power supply for complete calibration

A dedicated kilovolt amplifier ads the capability to calibrate high voltage probes and dividers at up to 10kV DC / 5kV AC

  • Outputs from 1kV to 10kV DC
  • Outputs from 1kV to 5kV AC at up to 60Hz
  • Operated using supplied software or via ProCal calibration software

Increase your laboratories workload coverage to include high current power supplies with up to 60A/100V outputs.

  • Easy to use, low cost solution
  • Accurate, stable electronic load
  • Minimises equipment required for calibration

External

EXT HV

The EXT HV Adapter allows insulation testers with test voltages of up to 15kV to be used with the 3200. Resistances of up to 1TOhm are available.

  • Calibrates insulation testers at voltages up to 15kV
  • Simulates resistances up to 1TOhm
  • External Option, can be purchased for use with pre-existing equipment