2000 Series

Multi-Product Calirbaitor

The 2000 Series Calibrators use the latest technology from the reference source to the front panel design to give outstanding accuracy and performance. The latest foil resistors and an ultra linear D/A design ensures stable, low noise outputs suitable for today’s calibration requirements.

  • AC/DC Voltage1000V
  • AC/DC Current to 20A
  • 2&4Wire Resistance to1GR
  • Capacitance to 100uF
  • Power Calibration Option
  • Oscilloscope Calibration Option

ASK AN EXPERT

Information

Description

The 2000 Series Calibrators use the latest technology from the reference source to the front panel design to give outstanding accuracy and performance. The latest foil resistors and an ultra linear D/A design ensures stable, low noise outputs suitable for today’s calibration requirements.

Developed for both laboratory and on site calibration, the 2000 series packs full calibration functionality into a briefcase size box. After a fast warm up time the 2000 series is ready to start work. The modern circuit design and use of low temperature coefficient components combined with the internal temperature monitoring and compensation allow the 2000 series calibrators to be used in uncontrolled environments.

Calibrates, analogue &digital multimeters, digital thermometers, optical tachometers, frequency counters, chart recorders, low ohm meters, power meters, clamp meters, oscilloscopes, rlc meters, power supplies

The World’s First Truly Portable Calibration System

  • Ideal for On-Site calibration
  • Ultra portable (12.5kgs)
  • Custom Carry Case with Front & Rear access
  • Laptop extender case for a complete system solution

The world’s only truly portable calibration system enables for the first time
calibration work to be performed in-situ saving both time and inconvenience
for military, marine, aerospace and industrial applications.
The small footprint of the calibrator makes it ideal for use in confined spaces. Operation from within the custom carry case, together with a laptop PC eliminates lengthy setup delays.

2000 Series SPECIFICATIONS

2000 Series SPECIFICATIONS

2006

2041A

2050

DC VOLTAGE
Best 1 Year Accuracy

2041A

0 ± 1000V
± 25ppm

2050

0 ± 1000V
± 50ppm

AC VOLTAGE
Best 1 Year Accuracy

2041A

0 - 1000V
± 0.03%

2050

0 - 1000V

DC CURRENT
Best 1 Year Accuracy

2041A

0 - ± 20A
± 20ppm

2050

0 ± 20A

AC CURRENT
Best 1 Year Accuracy

2041A

0 - 20A
± 0.06%

2050

0 - 20A

2/4 WIRE RESISTANCE
Best 1 Year Accuracy

2041A

0 - 1 Gohm
± 40ppm

2050

0 - 10MΩ

CAPCITANCE
Best 1 Year Accuracy

2041A

1nF - 100uF
± 0.25%

2050

1nF - 1uF

2006

2041A

2050

2006A Resources

2006A Resources

2041A Resources

2041A Resources

2050 Resources

2050 Resources

Options & Accessories

External

1000 Lead

A comprehensive set of test leads providing every connection required for typical measurements

A superior thermocouple simulation/measurement option, using a unique external adapter.

  • Offers fast and accurate calibration of thermocouple meters
  • Uses an innovative external measurement of cold junction temperature for ultimate accuracy
  • Utilising a thermocouple plug removes the requirement for expensive thermocouple compensation cable
 

Calibrate clamp meters at up to 1500A using the EA002 clamp meter. A unique design enables clamps of all sizes to be used, while minimising errors due to alignment

  • Calibrates clamp meters up to 1500A (30A input)
  • 2/10/50 Turn Coils
  • High accuracy AC/DC design, with minimal errors due to alignment
  • Wide range of clamp sizes covered, from 10mm jaw diameter to larger clamps
  • Alignment table included for accurate and repeatable readings

Instantly add the ability to calibrate tachometers to 60,000 RPM by adding the EA003 to your calibrator

  • High-intensity LED light source
  • Direct keyboard input in RPM
  • Control via ProCal for fully automated calibration
  • Output range from 60 to 60,000 RPM

Enables calibration of source functions of Process Control instruments including voltage, current and resistance.

  • Extends workload of 1000 Series Calibrators
  • Measure source functions from process control instruments
  • Voltages up to 30V
  • Currents up to 30A
  • 2 and 4 wire resistance up to 10 kOhms
  • 24V loop supply

Internal

Option INS

Enables calibration of insulation testers up to 1000V/1GOhm, and continuity testers with up to 320mA testing current.available on 1000 series only.

An external pressure module for use with Transmille products, designed to extend capabilities to 1 PSI

An external pressure module for use with Transmille products, designed to extend capabilities to 5 PSI

An external pressure module for use with Transmille products, designed to extend capabilities to 10 PSI

An external pressure module for use with Transmille products, designed to extend capabilities to 50 PSI

An external pressure module for use with Transmille products, designed to extend capabilities to 100 PSI

An external pressure module for use with Transmille products, designed to extend capabilities to 500 PSI