UK
USA
India
3xxx Transit Case
Ideal for transporting to harsh environments such as oil rigs and shipyards, the 3xxx Transit Case provides a safe transportation option for the unit, accessories and manual.
A custom laser cut foam interior ensures the saftey of your investment during shipping.
Fittted with handles and wheels, the 3xxx Transit Case is easy to move and transport.
Related Products
You may also like…
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
Electrical Test Equipment Calibrator
Electrical Test Equipment Calibrator
- Fastest and safest solution for calibration of Loop, RCD, PAT and Insulation Testers
- Calibration time reduced to under 15 minutes
- Dedicated, localised mains socket
- Test uncertainty ratio of 4:1 when calibrating electricians test tools
- Short warm up time
- Portable and lightweight
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 100 MOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
You may also be interested in...
Related products
External
An external pressure module for use with Transmille products, designed to extend capabilities to 1 PSI
A superior thermocouple simulation/measurement option, using a unique external adapter.
- Offers fast and accurate calibration of thermocouple meters
- Uses an innovative external measurement of cold junction temperature for ultimate accuracy
- Utilising a thermocouple plug removes the requirement for expensive thermocouple compensation cable
External
An external pressure module for use with Transmille products, designed to extend capabilities to 10 PSI
External
A comprehensive set of test leads providing every connection required for typical measurements
External
Calibrate clamp meters at up to 1500A using the EA002 clamp meter. A unique design enables clamps of all sizes to be used, while minimising errors due to alignment
- Calibrates clamp meters up to 1500A (30A input)
- 2/10/50 Turn Coils
- High accuracy AC/DC design, with minimal errors due to alignment
- Wide range of clamp sizes covered, from 10mm jaw diameter to larger clamps
- Alignment table included for accurate and repeatable readings
External
For integration in to mobile test systems, or permanent installation in a laboratory, a 19" rack system is provided
Adds measurement capability to 1pA resolution, and measures high value resistors to 1TOhm using the calibrator as a precision DC voltage source
- Accurate current measurement down to 1pA resolution
- Ideal for high value resistance measurements up to 1 TOhm
- High resistance measurement voltages up to 1000V
- 5 current measurement rnages from 10nA to 100uA
- Control directly from the calibrator front panel or use with ProCal software
External
An external pressure module for use with Transmille products, designed to extend capabilities to 100 PSI
Measure environmental factors both on site and in the laboratory
- Humidity measurement from 10% to 90%
- Temperature measurement from 0°C to 50°C
External
A dedicated kilovolt amplifier ads the capability to calibrate high voltage probes and dividers at up to 10kV DC / 5kV AC
- Outputs from 1kV to 10kV DC
- Outputs from 1kV to 5kV AC at up to 60Hz
- Operated using supplied software or via ProCal calibration software
External
The BreakD option allows the 3200 to calibrate both voltage output and current measurements of HiPot and Breakdown testers up to 12kV AC/DC
- 4 voltage ranges: 3kV & 12kV, AC and DC Voltage
- 9 Load Resistors/Current Ranges: 50kOhms (20mA) to 20MOhms (20uA) @ 1kV
