UK
USA
India
References & Standards
Enable easy connections between Type LC and Bare wire cables with the AC-DC-LC-POST adapter. This adapter is designed for use with the Transmille 50A and 100A AC/DC Shunts; however, it can be used to convert from bare wire to type LC for other applications also. A maximum current of 100A AC RMS is allowed, with [...]
External
A comprehensive set of test leads providing every connection required for typical measurements
1000
ULTRA PORTABLE CALIBRATOR
- Full function, ultra portable calibrator
- AC/DC Voltage output to 1000V
- AC/DC current to 10A (500A using EA002 Coil)
- Resistance to 100 MOhms
- Thermocouple simulation
- Full compatibility with ProCal software
1000
ULTRA PORTABLE CALIBRATOR
- Full function, ultra portable calibrator
- AC/DC Voltage output to 1000V
- AC/DC current to 10A (500A using EA002 Coil)
- Resistance to 100 MOhms
- Thermocouple simulation
- Full compatibility with ProCal software
Legacy Products
Multi-Product Calirbaitor
The 2000 Series Calibrators use the latest technology from the reference source to the front panel design to give outstanding accuracy and performance. The latest foil resistors and an ultra linear D/A design ensures stable, low noise outputs suitable for today's calibration requirements.- AC/DC Voltage1000V
- AC/DC Current to 20A
- 2&4Wire Resistance to1GR
- Capacitance to 100uF
- Power Calibration Option
- Oscilloscope Calibration Option
Legacy Products
Electricians Test Equipment
- Insulation Testers
- RCD Testers
- Loop Testers
- Wiring Check
- Included calibration checksheet for your instrument
Portable Test Equipment
Precision References and Standards
- 0 - 10 kOhm
- 0.1% Accuracy (0.01% Accuracy option)
- RS232 Interface
- 1 Watt power rating
- Front panel display & controls
- Virtual Front Panel software for PC
External
A comprehensive set of test leads providing every connection required for typical measurements
References & Standards
Precision References and Standards
- Calculable AC voltage reference source
- Accuracy in the order of 10ppm
- Traceable to any DC voltage multimeter with suitable accuracies
- AC voltage with frequency to 1kHz
References & Standards
Precision References & Standards
- Precision current shunt array
- Values 10mA through to 10A
- 1 year stability of up to 5ppm
- 4-Wire PT100 Output
- Temperature coefficients of less than 0.6ppm/°C
References & Standards
Precision References and Standards
- Electrometer currents to 10nA
- Resistance from 1 Mohm to 100 Gohm
- Traceable to 1 GOhm standard
References & Standards
Precision References and Standards
- Decade resistances from 1 Ohm to 10MOhm
- Temperature co-efficients as low as 0.1ppm/°C
- Annual stabilities of better than 5ppm
- Precision decade resistance reference
References & Standards
Precision References & Standards
- 4 Banks of 10V and 1.018V outputs
- Internal battery backup for transportation
- Stability of better than 2ppm/year
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
3000A
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 100 MOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
Electrical Test Equipment Calibrator
Electrical Test Equipment Calibrator
- Fastest and safest solution for calibration of Loop, RCD, PAT and Insulation Testers
- Calibration time reduced to under 15 minutes
- Dedicated, localised mains socket
- Test uncertainty ratio of 4:1 when calibrating electricians test tools
- Short warm up time
- Portable and lightweight
33XXA
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
33XXA
PRECISION Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload