3000A Series
PRECISION MULTIPRODUCT CALIBRATOR
The 3000A Series multiproduct calibrators have been designed to help you and your business, allowing a wide range of calibration work to be performed quickly, accurately and economically. Modern calibration is a competitive market, and cost effective equipment and software are key considerations.
The 3000A Series calibrators offer the widest workload coverage of any calibration system presently available. The unique concept of external calibration adapters, combined with built-in measurement capability, dramatically extends the range of instruments that can be cost-effectively calibrated.
Consisting of 3 models ranging from 8ppm to 50ppm, the 3000A Series Multiproduct Calibrator provides a solution for your laboratory workload requirements.
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- 0 - 1 GOhm Resistance
- 1nF - 10mF Capacitance
- 1Hz - 10MHz Frequency
- Range of external accessories to increase workload
HIGHLIGHTS
Traceable Self-Verification Functionality
To maintain confidence in your equipment, simply connect an 8000 series digital multimeter to the rear of the unit and enter 'self-calibration mode'. The 4000 series will then proceed to measure its outputs automatically and generate a test report which can be exported to a USB memory stick for analysis on a computer, and print a test report via a USB printer for maintaining records.
WIDE WORKLOAD COVERAGE
The 3000 series offers the widest workload coverage of any multi-product calibrator, with the ability to calibrate 18 types of instrument. It has the power to drive older analogue instruments alongside the accuracy to calibrate modern digital instruments.
COST-EFFECTIVE CALIBRATION
The 3000 series features three models designed to suit every budget and accuracy requirement, and with a wide range of options that allow your calibrator to be tailored to meet your needs, the 3000 series is expandable for future needs.
AUTOMATED CALIBRATION
Automate calibration with Procal - the world's easiest to use multi-discipline calibration software for maximum calibration throughput.
PRODUCT RANGE
DC VOLTAGE
Best 1 Year Total Accuracy
0 - ±1000V
±50ppm
0 - ±1000V
±25ppm
0 - ±1000V
±8ppm
DC CURRENT
Best 1 Year Total Accuracy
0 - ±22A
±100ppm
0 - ±30A
±50ppm
0 - ±30A
±50ppm
AC VOLTAGE
Best 1 Year Total Accuracy
20mV - 1000V, 10Hz - 100MHz
20mV - 1000V, 10Hz - 500kHz
0.04%
20mV - 1000V, 10Hz - 1MHz
0.015%
AC CURRENT
Best 1 Year Total Accuracy
20uA - 22A, 10Hz - 10kHz
0.07%
20uA - 30A, 10Hz - 10kHz
0.06%
20uA - 30A, 10Hz - 10kHz
0.04%
RESISTANCE (PASSIVE)
Best 1 Year Total Accuracy
0 - 100 MOhms
60ppm
0 - 1 GOhms
40ppm
0 - 1 GOhms
18ppm
CAPACITANCE (PASSIVE)
Best 1 Year Total Accuracy
10nF - 1uF
0.25%
1nF - 10uF
0.25%
1nF - 10uF
0.25%
FREQUENCY
Best 1 Year Total Accuracy
1Hz - 10MHz
20ppm
1Hz - 10MHz
20ppm (1ppm Option)
1Hz - 10MHz
20ppm (1ppm option)
TEMPERATURE (THERMOCOUPLE)
Best 1 Year Total Accuracy
J / K / T / R / S / B / U / N / E / L / U / C / 10uV°C
±0.09°C
J / K / T / R / S / B / U / N / E / L / U / C / 10uV°C
±0.09°C
J / K / T / R / S / B / U / N / E / L / U / C / 10uV°C
±0.09°C
Resources
3010A Specifications
3010A Extended Specifications - V1.90
3010A Example Calibration Certificate
3010A Power Accuracy Calculator
3041A Specifications
3041A Extended Specifications
3041A Example Calibration Certificate
3041A Power Accuracy Calculator
3050A Specifications
3050A Extended Specifications
3050A Example Calibration Certificate
3000A Calibration Resources
3000A Calibration Quick Start Guide
3000A Calibration Manual
3000A Oscilloscope Amplitude Verification
3000A Resources
Application Note - 3000 - 3300 Series Overview
3000A Series Fault Diagnosis Sheet (English)
3000A Series Brochure (Japanese)
3000A Series Application Note - GPIB Commands (English)
3000A Series Operation Manual (English)
3000A Series Brochure (English)
3000A Series Advanced Command Set (English)
3000A Series Fault Diagnosis Sheet (English)
PWRDDS / ProWave User Manual
Transmille Product Guide
Transmille Product Matrix
Transmille Product Guide 2015/16 (English)
Transmille Product Guide 2015/16 (Japanese)
Transmille Warranty
Transmille Warranty
FAQs
Transmille oscilloscope calibration options have amplitude ranges up to 300V to offer calibration of a wider range of oscilloscopes than our competitors.
Examples of oscilloscopes that require verification at these ranges are the Tektronix THS700A series and the Hanascope 801.
Transmille's EA001/EA001A has been designed to minimise typical errors associated with calibration of thermocouple meters that are ignored by other designs.
By making the thermocouple option external, the low voltage output (in the order of 0mV to 100mV, with accuracies in the microvolt level required for accurate simulation) is away from any heat generating components in the calibrator therefore reducing any localised thermal EMF effects.
The inclusion of a Thermocouple plug removes the need to find compensation cables of the correct type, which is a considerable source of error. If the wrong type of compensation cable (for example, when simulating a K type thermocouple, a J type compensating cable) is used there will be a significant error introduced through use of the wrong cable.
Finally, a temperature measurement is conducted at the connection with the UUT, in the thermocouple plug itself. This is measuring the cold junction as close to the internal measurement of the UUT as possible, removing localised differences in temperature.
For further information on the design of our thermocouple option, please view our YouTube video HERE.
Transmille products have been designed to most accurately represent the requirements of modern commercial laboratories and the typical equipment that is found inside.
Almost all modern computers are fitted with a USB interface, so to enable direct connection without the requirement for additional adapters a USB connection is provided.
IEEE 488/GPIB interfaces are typically quite expensive, and are another lead/connection to remember when performing on-site calibration work.
GPIB interface options are available on our multiproduct calibrators, and are included as standard on the 8000 series multimeters.
The 30A output on Transmille multiproduct calibrators is included to ensure not only calibration of clamp meters up to 1500A, but also for calibration of low value high current shunts that would otherwise require a dedicated power supply which is an additional instrument that requires calibration.
The 30A function is limited by a thermal cut-out, that when the units internal temperature reaches a predetermined limit the output will be turned off.
The length of time that the 30A output is active for depends mainly upon the load that is connected, a higher resistance of load will mean that more power is dissipated within the load, reducing the self-heating of the high current section of the calibrator.
The worst-case scenario is that of a short across the output terminals, where all of the heat is being dissipated inside the heatsink of the calibrator. In the case of a coil that provides a considerable load (especially at AC, where the resistive and inductive effects of the coil take effect) the 30A can be present for much longer as the heat is being dissipated inside the coil.
We believe that safety is a prime consideration of a laboratory, second only to performance of our products.
Imagine a situation where a laboratory technician has finished calibration for the day, and has disconnected the instrument under test, but left the voltage source on at a setting of 1000V AC.
Later that evening, a cleaner comes into your laboratory or facility and touches the test leads left on the bench, potentially receiving a very nasty shock. Transmille have added this safety feature to avoid situations of this type from happening.
There are, however, cases where the timeout wishes to be extended, or even disabled. This can be performed through the Calibrator Setup program via your computer, or can be disabled prior to shipping on request.
VIDEOS & DEMOS
3000A Service Guide - Entering Calibration Mode
In this video, we show how to enter the calibration mode of the 3000A series multiproduct calibrator from the front panel.
3000A Service Guide - Adjusting DC Voltage
In this video we show how to adjust the DC voltage output of the 3000A series multiproduct calibrator. Using the guided calibration mode this is a simple procedure, which can be performed in just a few minutes.
3000A Service Guide - Adjusting AC Voltage
In this video we demonstrate how to adjust the AC voltage output of the 3000A series multiproduct calibrator.
3000A Service Guide - Output Protection Fuse Replacement
In this video we show how to diagnose and replace the front panel output protection fuses on the 3000A series calibrator.
How To - Calibrate a Multimeter with the 3000A Calibrator
In this video we demonstrate how to verify key features of a typical digital multimeter using a 3010A Multiproduct Calibrator