UK
USA
India
4xxx Soft Case
Designed for carrying your calibrator when working on site, the soft carry case includes side pockets, a large top pocket for leads and a laptop and a carry strap for over arm carrying.
The lightweight construction of the calibrator and soft case allows easy carrying of the unit.
The 4xxx Softcase can be used without removing the unit, as front and rear sections unzip to allow access to front and rear panel connections.
- Lightweight construction
- Front and rear zip sections
- Carry strap
Related Products
You may also like…
4000
Advanced Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- Variable Resistance up to 1GOhm
- Variable Capacitance to 100mF
- 1Hz - 10MHz Frequency
- AC current maximum frequency 30kHz
- Range of external accessories to increase workload
- USB and GPIB interface fitted as standard
- Removable Handles
4000
Advanced Multiproduct Calibrator
- 0 - 1000V DC / AC Voltage
- 0 - 30A DC / AC Current
- Variable Resistance up to 1GOhm
- Variable Capacitance to 100mF
- 1Hz - 10MHz Frequency
- AC current maximum frequency 30kHz
- Range of external accessories to increase workload
- USB and GPIB interface fitted as standard
- Removable Handles
You may also be interested in...
Related products
External
An external pressure module for use with Transmille products, designed to extend capabilities to 500 PSI
External
As multimeters add more accurate low current ranges, traditional multi-product calibrators lack the precision and noise level for accurate calibration. With the EA013 pA source adapter, calibration of these instruments becomes simple
- Ideal for calibration of electrometer instruments
- Source accurate current down to picoamp levels
- Low open circuit compliance voltage
- Safe to use on sensitive input circuits
- Controlled directly from the calibrator front panel or via supplied software
- Compatible with ProCal for full measurement automation
External
A comprehensive set of test leads providing every connection required for typical measurements
External
The BreakD option allows the 3200 to calibrate both voltage output and current measurements of HiPot and Breakdown testers up to 12kV AC/DC
- 4 voltage ranges: 3kV & 12kV, AC and DC Voltage
- 9 Load Resistors/Current Ranges: 50kOhms (20mA) to 20MOhms (20uA) @ 1kV
External
Calibrate clamp meters at up to 1500A using the EA002 clamp meter. A unique design enables clamps of all sizes to be used, while minimising errors due to alignment
- Calibrates clamp meters up to 1500A (30A input)
- 2/10/50 Turn Coils
- High accuracy AC/DC design, with minimal errors due to alignment
- Wide range of clamp sizes covered, from 10mm jaw diameter to larger clamps
- Alignment table included for accurate and repeatable readings
Adds measurement capability to 1pA resolution, and measures high value resistors to 1TOhm using the calibrator as a precision DC voltage source
- Accurate current measurement down to 1pA resolution
- Ideal for high value resistance measurements up to 1 TOhm
- High resistance measurement voltages up to 1000V
- 5 current measurement rnages from 10nA to 100uA
- Control directly from the calibrator front panel or use with ProCal software
Enables calibration of source functions of Process Control instruments including voltage, current and resistance.
- Extends workload of 1000 Series Calibrators
- Measure source functions from process control instruments
- Voltages up to 30V
- Currents up to 30A
- 2 and 4 wire resistance up to 10 kOhms
- 24V loop supply
A superior thermocouple simulation/measurement option, using a unique external adapter.
- Offers fast and accurate calibration of thermocouple meters
- Uses an innovative external measurement of cold junction temperature for ultimate accuracy
- Utilising a thermocouple plug removes the requirement for expensive thermocouple compensation cable
External
A comprehensive set of test leads providing every connection required for typical measurements
External
An external pressure module for use with Transmille products, designed to extend capabilities to 50 PSI
